Maintenance Performance Is Built, Not Bought

Why sophisticated CMMS technology creates value only when the organisation can execute around it

A CMMS can tell an organisation what should happen. It cannot, by itself, make the organisation do it.

Some of the world’s largest mining operations have every visible ingredient of maintenance maturity: modern fleets, substantial budgets, specialist reliability teams, extensive OEM support and sophisticated Computerised Maintenance Management Systems. Yet preventive maintenance is still delayed, backlogs continue to age, critical spares remain unavailable and reactive work dominates.

EnterpriseIS has also observed the reverse. At a remote surface molybdenum mine in Siberia, the operation relied on older equipment, limited OEM support and basic maintenance technology. Recurring maintenance was controlled through physical flip cards, yet very few recurring tasks were missed.

This was a field observation rather than a formal benchmark, and the site was not a complete model of reliability maturity. Even so, it raises a question many better-resourced organisations should confront: if a simple manual process can create stronger control of recurring work than a modern CMMS, what is actually driving performance?

The card made work visible. The operating discipline around it turned visibility into performance.

What the card made impossible to ignore

Each card represented the maintenance requirements for an asset: the work required, the frequency, the parts and consumables, the labour requirement and the relevant history. When maintenance became due, central administration issued the card to a supervisor. The card then had to be physically returned once the work was complete.

That simple movement created control. Administrators knew what was due, which work had been released and who held it. Supervisors were responsible for labour and completion. Stores supported the parts requirement. Operations and maintenance coordinated equipment access. Administration was not merely recording transactions after the event; it was actively controlling the workflow.

Most importantly, the work could not quietly disappear into a large electronic backlog. A person physically held the card. If the task was not completed, the reason had to be explained and a reschedule decision made.

Visibility only mattered because accountability followed

The card system sat inside a clear operating hierarchy. Administrators followed up supervisors. Supervisors accounted to the Maintenance Manager. The Maintenance Manager accounted to senior leadership. The cards made status visible, but leadership routines made non-completion difficult to ignore.

The SBS Cultural Atlas describes Russian business culture as relatively status-conscious, with organisational authority generally apparent. This is a broad cultural tendency, not a description of every Russian workplace. At this particular operation, the practical effect was a strong chain of accountability. SBS Cultural Atlas: Russian business culture

The lesson is not that other organisations should copy a hierarchical workplace model. Hierarchy may reinforce execution, but excessive deference can suppress challenge, bad-news reporting and alternative thinking. The useful lesson is that this organisation converted authority into visible ownership, which many more sophisticated businesses fail to do.

Why the simple system worked

The result can be understood through the EnterpriseIS Improvement Sustainability Model:

Improvement Sustainability = f (Acceptance × Capability × Technical Solution)

Acceptance: The maintenance process was treated as legitimate and important. Operations supported equipment release, supervisors expected issued work to be completed, and administrators had authority to follow up.

Capability: People understood the workflow and their role in it. Capability did not mean a large team of specialists. It meant having the practical knowledge, authority and routines needed to execute consistently.

Technical solution: The cards were technologically basic, but appropriate for controlling recurring work. They made status and ownership visible. They were effective for work control, although weak for downtime analysis, failure trending and reliability improvement.

Acceptance and capability amplified a simple technical solution. In many larger organisations, investment is weighted towards the technical solution while the other two elements remain weak. EnterpriseIS Improvement Sustainability Model

Technology and capital create potential. Leadership, acceptance and capability convert that potential into performance.

What a CMMS can do, and what it cannot

This is not an argument against CMMS technology. A modern CMMS should outperform a physical card system because it can support work-order control, resource allocation, maintenance planning, equipment history, cost capture, downtime analysis and reliability improvement.

AusIMM has described how computerised maintenance systems can support work orders, resource allocation, progress monitoring and costing while capturing equipment history, downtime and planning information. Those capabilities extend far beyond a card system. AusIMM: Mining Equipment Maintenance Management

But a CMMS cannot establish trust between operations and maintenance. It cannot make a supervisor own overdue work, ensure that users enter accurate failure data, or require a leader to explain why agreed maintenance was missed. It can make behaviours visible and embed workflows, but the organisation must create and reinforce the behaviours themselves.

A task existing in the system is not the same as the work being under control.

When visibility becomes an illusion

In poorly governed systems, thousands of work orders can sit across priorities, statuses and backlog categories. Everything is technically visible, yet little has a clear operational owner. As organisations grow, additional planners, schedulers, approvers, administrators and reliability analysts may add capability, but they can also increase the distance between the system and frontline execution.

The organisation can then confuse activity with control: work orders processed, dashboards updated, reports issued, meetings held and system compliance achieved. These measures are useful, but they do not prove that equipment is being maintained effectively.

Australian asset management council connects operations and maintenance with culture, leadership, reliability, risk and lifecycle value. Maintenance maturity must therefore be judged using both process discipline and equipment outcomes. Asset Management Council  |  Engineers Australia

A business can report high work-order closure while repeat failures increase, asset condition deteriorates and availability falls. The dashboard can look healthy while the equipment tells a different story.

Execution discipline is not reliability maturity

The Russian operation should not be romanticised. It controlled recurring maintenance well, but breakdown and downtime information was poor, newly identified defects were added manually, and structured failure analysis was limited. The process supported maintenance execution, not advanced reliability maturity.

The system also depended heavily on the Maintenance Manager and central administrator. A mature operating model cannot rely on a few disciplined individuals continually driving it. Required behaviours must be embedded in standard work, governance, decision rights, role clarity and workforce capability.

The spares problem exposed the limits of culture

The same site had significant storage and preservation weaknesses. Motors and other components were exposed to snow, moisture, dust, corrosion and severe temperature variation. Some spares were damaged or unusable before they were required.

Electrical Apparatus Service Association, Inc. (EASA) guidance identifies environmental conditions, humidity, vibration, bearing and winding protection, and record keeping as important elements of electric-motor preservation. EASA: Best Practices for Electric Motor Storage

Strong culture cannot fully compensate for inadequate facilities, poor preservation, weak data or limited reliability engineering. Equally, sophisticated systems and large budgets cannot compensate for weak accountability or inconsistent execution. Sustainable maintenance performance requires both capable systems and disciplined operating behaviours.

What leaders should test

Before investing in another CMMS module, predictive-maintenance platform or dashboard, leaders should test the operating model behind the technology:

  • Is preventive maintenance completed when due, or routinely deferred?
  • Does every task have an accountable owner, and are overdue tasks challenged?
  • When work is deferred, are the reason, risk owner and reschedule plan visible?
  • Do operations, maintenance, stores and administration collectively control execution?
  • Does the CMMS reflect field conditions, failure details and downtime accurately?
  • Do performance measures describe equipment outcomes, or mainly system activity?

A flip-card system should never provide stronger ownership of recurring work than a modern CMMS-supported operating model.

If it does, the answer is not to return to paper. The answer is to identify what the simple process made visible: ownership, priority, active control, collaboration and personal accountability, then deliberately build those behaviours into the modern maintenance operating model.

Evaluate what sits behind the CMMS

An EnterpriseIS Asset Management Evaluation examines whether systems, processes and behaviours genuinely support asset performance or merely create the appearance of control. It looks beyond the CMMS to assess how leadership, operations, maintenance, reliability, materials management and supporting functions work together across the asset lifecycle.

The objective is not simply to measure compliance with a framework. It is to establish an evidence-based view of current capability, identify the gaps most constraining performance, and define a practical pathway for strengthening people, process, governance and technical foundations.

The lesson is simple: technology can expose the gap, but only leadership, capability and accountability can close it.

Better systems help. Better culture delivers. The strongest organisations build both and connect them through disciplined execution.

Related Content

  • Asset Management – Explore practical support for asset management evaluations, maintenance strategies, CMMS selection, asset data, critical spares and lifecycle performance. 
  • Reliability Engineering – Learn how reliability analysis, FMECA, root cause analysis, defect elimination and condition monitoring can reduce equipment failure risk. 
  • Operational Excellence – Discover how leadership systems, performance reporting, Lean, 5S and Six Sigma support sustainable operational improvement. 
  • Operational Improvement Services – View the full range of EnterpriseIS services across asset management, reliability engineering, operational readiness and operational excellence. 
  • Industry Solutions for Asset-Intensive Organisations – See how EnterpriseIS supports mining, manufacturing, processing, utilities and infrastructure organisations.
  • EnterpriseIS Case Studies – Explore practical examples across asset management, reliability engineering, operational readiness and operational excellence. 

Contact us at the EnterpriseIS office nearest to you or submit an inquiry online.

Looking for Business Consultants?